Is Zantac 150 The Same As Protonix

engine crankshaft - Clutch motor

Clutch Removal

To remove the lock nut set of clutch discs, we first flatten the washer holding it with an appropriate pointer.




Remove the nut, bearing in mind that it is normal thread. To prevent the rotation axis, we lock the clutch, such as introducing a cloth between the primary drive gears, or use a pneumatic gun.




We can use this operation, once the primary transmission is blocked, to loosen the nut while holding the sprocket motor output. Recover the nut and lock washer




We removed the radial clamping spring discs can be mounted some drives.




Remove all clutch discs.




To remove such a package should install it in a vise, so that we can release the retaining of the axes of the clutch springs

Remove the inner sleeve with clutch assembly three cylindrical pins holding the axle.




Remove the shift shaft of the clutch plate by pulling it out. With the clutch plate, which is both the primary drive gear, the bearing will solidarity, because the plate is retained by a snap ring on the back.