How To Say Get Well In

POSTERS BADAJOZ CARNIVAL VIDEO SEMIFINAL 2010

Difference In Breasts In Pms And Pregnancy

SIKITRAKYS 2009 PRELIMINARY MURGAS

Personal Firtility Computer

ALL DAY 11

Youth Christian Slogans

CARNIVAL LINKS

http://losrepesca.spaces.live.com/
murgalacaidita.extreblog.com
murgalos3w.iespana.es
dakipakasa.spaces.live.com
www.murgatitirimundi.com
www.carnavaldebadajoz.com
www.carnavaldegades.com
www.lacomparsadejuancarlos.com

Pro And Cons Of Organ Selling

SIKITRAKYS 2009

Milena Veöba Early

VIDEO PHOTOS SIKITRAKYS

Brent Everett Blog.spot

6 Foot What Size Mountain Bike Frame

MURGA THE COMPONENTS

Jesus Dominguez " Chencha " - C ontraalto.
Rubio Enrique "Kike " ----------- C ontraalto. Guillermo Brito
---------------- Tenor.

Manuel Ferrera "Pilot " ----- --- T enormous. J.
Maria Lopez ----------------- ---- Guitar. Eduardo Marquez
---------------- Guitar. Federico González
"Fede " -T ---- enormous. Raul
Leitón " Act" ------------- --- C ontraalto. Moisés Martínez
--------------- Tenor.
Javier Martinez "Gaviota "---- Tenor.
Carlos Martín" Conde " - ----- C aja.
Manolo" Pepeillo " ------ --- ----- Bombo.
Juande -------------------------- ---- Tenor. Luis Garrido
------------------ ---- Tenor

Wedding Anniversary Animation

Impala 2009 - June 20



More information www.motoclubimpala.com

Mario Salieri Free Watchon-line

Where to connect servos to move camera, etc. Material

Connecting other peripherals

On the FlightCtrl the pads J3 J4 J5 J7 provide PWM output for channel 5, 6, 7 and 8. Note that J7 is intended to be used for the Camera Tilt.

For these tests we are pressing the shutter button unless stated otherwise. If not, a warning message will be displayed and the script will end. Start the script. After 10 sec delay, 3 photos at 5 sec intervals taken. Press shutter to finish, press ALT button to exit. Press shutter button to stop script and ALT to exit. C) Single shots with screen blank Set 'blank screen' to '1' and start script. E) Single shots with auto-shutdown

8	J7
Saturday, April 4, 2009 Unhandled Exception C00005 Adress 00652f30 CHDK Wiki tutorial Wiki Testing the time-lapse (intervalometer) feature http://chdk.wikia.com/wiki/UBASIC/Scripts	Load the script 'time_lapse.bas'. The default parameter settings produce a delay of 10 seconds and then take 3 photos at 5 second intervals.
Single shots, no bracketing. For the following, make sure camera is in ordinary, single-shot mode.	A) Default script
B) Endless mode Set 'endless mode' parameter to '1' and start script.	Set 'endless mode' parameter to '0'
This may not work on all cameras. D) Single shots with interval longer than 10 secs and with screen blank	Set 'shoot interval second' to 15 and start script. LED will flash every 10 secs to show script is running.

Set 'blank screen' to '0' and 'shutdown' to '1'. Start script. Camera will shutdown on completion.

This may not work on all cameras.

F) Single shots with USB start and auto shutdown


This could be used with a kite, model aeroplane or balloon.
Connect your USB switch,set 'shutdown' to '2'and start script.
Press USB switch to start sequence.
Camera will shutdown on completion.

This may not work on all cameras.

G) Single shots with USB start and USB shutdown


This could be used with a kite, model aeroplane or balloon.
Set 'endless mode' parameter to '1' and start script. Press USB switch to start sequence. Press USB switch to stop sequence.
Camera will shutdown after next shot is taken.
This may not work on all cameras.

H) Single shots with USB start,USB shutdown and blank screen

This could be used with a kite, model aeroplane or balloon.
Set 'blank screen' to '1' and start script.
Press USB switch to start sequence.
Press USB switch to stop sequence. Camera will shutdown after next shot is taken. This may not work on all cameras.
Set 'blank screen','shutdown' and 'endless mode' to '0'.


I) Long exposures
Although it is up to the user to set a suitable interval between shots, SDM enforces a minimum interval if necessary.
For exposures up to 0.5 sec, the minimum one second shooting-interval may be used.
For exposures 0.6 to 1 second, a minimum interval of two seconds is set.
For exposures longer than one second, the minimum interval is 4x the shutter speed.
e.g for 1.3 sec the interval will be 5 seconds (the exposure time is 1.3 + 1.3 for dark correction = 2.6 seconds).


Shots with Tv bracketing (continuous-shooting mode)


In continuous-shooting mode, bracketing is always alternate exposures (not lighter or darker). You can set 3 to 19 bracketing exposures per shot. If you enter an even number of bracketing exposures it will be forced to the lower odd number.
If the camera is not set to continuous-shooting, a warning message will be displayed and the script will end.
In all bracketing modes (Tv and focus) you can save the values to a file by setting script parameter 'save stack' to '1'.
If this feature is enabled, the word 'Log' will be displayed on the right of the screen.
Each bracketing sequence is assumed to take at least 2 X number-of-bracketing shots.
i.e. 3 bracketing shots are assumed to take 6 seconds.
If you try to set an interval between shots shorter than this, it will be overriden by the above value.
RAW images may take longer, you should set a suitable minimum interval.
A) Set camera to continuous-shooting mode


Set 'save stack' to '1', 'num of 1/3 EV steps' to '3', 'bracket exposures' to '3', 'single/cont/timer' to '1'.
Start script.
On completion, the approximate time required for one bracketing sequence will be indicated.
This is particularly useful when doing auto focus-bracketing.
In the CHDK/STACKS folder there will be a text file showing the Tv settings used for the bracketing sequence.

Hacer videos con tripletas HDR:

Quote from: barret on 15 / February / 2009, 13:32:04


How can i do this automagically (batch)?



Download Hugin
http://downloads.sourceforge.net/hugin/hugin-0.7.0_win32-setup.exe?modtime=1224543831&big_mirror=0
Choose the option to just install Enfuse\Enblend and the droplets.

On your desktop, create a shortcut to 'enfuse_droplet.bat'.

Mine looks like this "C:\Program Files\Hugin\bin\enfuse_droplet.bat"

Put your images into a folder, drag the folder onto the shortcut and when asked enter '3' for the number of images in Each bracket.

i have just tried it, works fine.

Watery Cm Right Before Period

Hi, I have put in the Wiki all the manuals, and I opted for that option, I'll post something here but I will to clean everything in the Wiki, ok? Greetings!


I forgot to put it, the Wiki is:


http://mikrokopter.wikispaces.com


accept suggestions, corrections and everything you want eh ????? Thanks!

Braces Selector Colors

up to Keep Trick-Parameter Height MKs heavy ...

Hello, this morning, walking around RCGroups, I found this:

"... I'm Probably Not the first to mention it But The best Changing place to start paramters When You Increase the weight of your MK is the "Z-Acc Wirkung."



When you Increase this parameter the Mikrokopter Will Be Influenced more by the Z axis Accelerometers Movement in combination with the barometric pressure. Heavier On May Mikrokopters you want to Increase this value - try values \u200b\u200bfrom ~ 2 to 8, I Have Heard events people report values \u200b\u200bof near 20 on Heavier MK's. Key thing is to experiment - put the parameters on a poti and See What works best for you. "



That is, if you do not work well MAINTAIN HEIGHT, and you have a MK a little heavy, try to raise the value parameter "Z-Acc Wirkung" to 5, 6, 7 or 8 and try to see how it goes, Greetings!

Foot Stepped On By Stiletto

4 hours to 0.5 Volt - PC Power Supply amended

15x increase the metal exposed for 4 hours continuously at 0.5 Volt - The Etching lines are not lost, are kept clean and accurate.

EXERCISE WORKSHOP "On the table," Taller 99 , Chile


Ignacia Mesa / Etching-I (Etching)

Stage I: drawing thick lines Drawing on traditional varnish exposed to 0.5 Volt for 4 continuous hours .
Results: the engraved line is very clean and precise. Traditional protective varnish rose in some places, for which we used shellac, which was more effective.

Ignacia Mesa / Engraving - II (Micropunto / Aquatint)

Stage II: Reserve white traditional varnish with shellac and then exposed to 0.5 Volt for 4 continuous hours.
Results: black is not achieved, it is necessary to place the iron in the electrolytic tank for longer hours.

What Happens After Puppy Takes Worm Medicine

What are the main parameters MKTOOL?

A brief explanation for those who want to keep trying different parameters in the MKTool, this is what makes each of them:

Best Mount And Blade Defeating

for hands with the welder ...

Here I put the list all components of a FC 1.3, in case one is encouraged to assemble parts of the plate that we can bring clean, BUT you have to solder SMD (my escapes me that for my pulse hehe): http://
www.reichelt.de/?ACTION=20; AWKID = 134869; PROVID = 2084
Other than that, because I think you need also plate and 3
Murata gyroscopes
Hale, if there are any brave do tell us if you need that prompted the board or the gyros, tell me please greetings!

Oakes & Nichols Funeral

Spanish Wiki Possible creation of the MK

Hi, I'm pondering whether to blog this format or the Wiki, what do you think? The
Wiki I have started to create what you have here:


Take a look, I find it easier to bring a better structure check, just in case, sign also that, cheers! Alberto

How Long Does A Co2 Fire Extinguisher Last

Introduction


The Mikrokopter was created by Holger Buss and Ingo Busker in Germany for two or three years.

is a very electronic cuatricóptero by allowing it very easy to fly and very stable.
comprises a cross-shaped frame with a brushless motor at each corner. There are various chassis sizes, the most common are the MK-40, with 40 cm of wheelbase of other opposites that propellers mounted 10x4, 5, and the MK-50, with 50cm wheelbase of engines, propellers 12x4, 5.

are 4 motors, controlled by 4 special drives, controlled by a single I2C bus.

central plate called FlightCtrl (FC), is responsible for giving orders to the other based on various sensors and gyroscopes, to maintain the horizontal, or allow the Mikrokopter (MK) obey the orders from our station.

The FC also mounted a height sensor, which allows us to enable the maintenance of a constant height automatically.

All parameters are modified by the program MKTool from a PC, which binds to MK by a programmer named MKUSB, which works through USB as its name suggests.
Apart from the basic kit included in the later plates can add 3 more: NavyCtrl (NC), the MKGPS (MG) and MK3MAG (MM). With these 3 plates have the possibility to maintain the current position of MK in air (even struggling against the wind), and to activate the MK will return to the starting position ("back home").

MK kits need 10-12 hours to fit, and require a basic skills-average soldering (many components are already soldiers, but you have to solder cables, capacitors, height sensor and some other things.)


MK can not be used for gainful activity because of a design is copyrighted by Holger Buss and Ingo Busker, but allows use by either an amateur way.

There is a great community around MK to continuously develop improvements, new firmware, new chassis, etc, with the glue that 80% are Germans writing in German, but with sites like this, or Forum of
www.aeromodelismovirtual.com
more and more information in English.

We have created the English manuals that are available for free download on our website, click here

.

You are invited to provide any item on this blog, Send these to

info@himodel.es

and we will put happy, Greetings! Alberto

How Do You Find Fetus Percentile

Sergafa Conversion of Corona RP8D1

RP8D1 Corona Conversion for use in the MK (POR SERGAFA)

Removing the signal receiver ppm CORONA RP8D1 for Mikrokopter

(fully realized by SERGAFA, thanks!)

This is a small tutorial on how to modify the CORONA receiver to extract the signal RP8D1 ppm and can run on our MK.

I've seen for various parts of the forum that this receptor appears to have many benefits for what will be flying in FPV, due to its large scope.

Before this unit I have changed some so they could operate in the MK's. All without problems.

In this case the CORONA RP8D1 has an integrated microprocessor called ATMEL MEGA88v.

This process is quite complex and full of analog / digital converter and other things that I will not explicar.La point is that in one of his sideburns reached receptor.Esta ppm signal is weak signal and low voltage also fills "noise" (meaning it's not a perfect square wave is filtered), which is fit for the MK.

What I had to do with an oscilloscope is to locate the signal voltaje.En ppm and know their various images you can see the layout of the components of the receiver and the explanation of how the signal achievement ppm.En Figure 1 shows the inside of the receiver and its components, in this case the microprocessor Atmel Mega88v.

Figure 2 shows the test point from which we extract the signal ppm for future modification and debugging señal.En this point the signal goes through the other side of the plate and provides the circuit Integrated SA606, the qual is covered by an electronic component.

Figure 3 shows enlarged the area of \u200b\u200btest signal as ppm and across the board enters a leg of ATMEL.

Figure 4 shows a circuit diagram of the circuit we must do to amplify the signal and convert it to a signal that the MK understand and manage correctamente.La explanation circuit is really simple.

The LM393 is a dual circuit speed comparator comparator rápida.Necesitamos this quickly so that we properly manage the signal R2 and R3 resistors salida.Las all they do is create a tension of about 2x input about the (- negative) LM393 circuit. We need to put this tension when compared to the weak signal we ppm of output a filtered signal with a peak voltage sufficient for the resistance R1 MK.La only sets an output voltage to 5V or so . The R3 may vary between a value of 0.670 K and 0.680 K without any problema.Hasta this truth follow me?

I know that for some, all this will seem Chinese and other insurance that is a "mini chapuzilla. But best of times do not know. I hope you help. I will not roll-up or with the intensity nor the long explanation of what makes the LM393 circuit. Figure 5 The pin I have set extracted from a circuit LM393 datasheet for you to know that each pin is and how to connect the resistors.

Figure 6 are the output pins of the receiver, where one of them, than us we want to connect the signal amplified ppm. Lifting of the circuit that if for no problems with the signal coming out of Atmel MEGA88v.

Figure 7 we see the circuit in test mode and as quietly, watching the oscilloscope clearly PPM signal to a level approx 5v Flight Ctrl perfect for MK.

The figure 8 shows the final result. Of course, say that is a bit experimental and highly improved. I hope to do the next circuit with SMD components and be able to insert inside the CORONA receiver.

you can also dispense with the small plate and place the Bakelite air components. Will be smaller. Everything to occupy less space and weight

.

I hope to have been helpful for building this small circuit.

components are worth more than 1 euro and do or not depends on what handyman who seais.El LM393 circuit so you can get in stores electronic without complications, even in MDS will be much better to reduce

final.Cuando size it has made in SMD and put some photos.

The truth is that it is not difficult to solder these 4 components and the point of testing
PPM signal is large enough to place a small

thin wire with solder.
I wish someone would dare and I explain how it has gone. Sorry if I explained bad
on occasion and in future I'll be improving interventions. Thanks and any questions on the circuit will not hesitate to

preguntar.Sergafa.

(although I put up, it is clear that this great work we are coming to work every bead is EXCLUSIVELY Sergafa fellow, I've only uploaded the pictures to our server and have copied here, thanks Sergio!)

Subscribe to: Posts (Atom)