up to Keep Trick-Parameter Height MKs heavy ...
Hello, this morning, walking around RCGroups, I found this:
"... I'm Probably Not the first to mention it But The best Changing place to start paramters When You Increase the weight of your MK is the "Z-Acc Wirkung."
When you Increase this parameter the Mikrokopter Will Be Influenced more by the Z axis Accelerometers Movement in combination with the barometric pressure. Heavier On May Mikrokopters you want to Increase this value - try values \u200b\u200bfrom ~ 2 to 8, I Have Heard events people report values \u200b\u200bof near 20 on Heavier MK's. Key thing is to experiment - put the parameters on a poti and See What works best for you. "
That is, if you do not work well MAINTAIN HEIGHT, and you have a MK a little heavy, try to raise the value parameter "Z-Acc Wirkung" to 5, 6, 7 or 8 and try to see how it goes, Greetings!
Tuesday, March 31, 2009
Wednesday, March 25, 2009
Foot Stepped On By Stiletto
4 hours to 0.5 Volt - PC Power Supply amended
EXERCISE WORKSHOP "On the table," Taller 99 , Chile
Ignacia Mesa / Etching-I (Etching)
Ignacia Mesa / Engraving - II (Micropunto / Aquatint)
15x increase the metal exposed for 4 hours continuously at 0.5 Volt - The Etching lines are not lost, are kept clean and accurate.
EXERCISE WORKSHOP "On the table," Taller 99 , Chile
Ignacia Mesa / Etching-I (Etching)
Stage I: drawing thick lines Drawing on traditional varnish exposed to 0.5 Volt for 4 continuous hours .
Results: the engraved line is very clean and precise. Traditional protective varnish rose in some places, for which we used shellac, which was more effective.
Results: the engraved line is very clean and precise. Traditional protective varnish rose in some places, for which we used shellac, which was more effective.
Ignacia Mesa / Engraving - II (Micropunto / Aquatint)
Stage II: Reserve white traditional varnish with shellac and then exposed to 0.5 Volt for 4 continuous hours.
Results: black is not achieved, it is necessary to place the iron in the electrolytic tank for longer hours.
Results: black is not achieved, it is necessary to place the iron in the electrolytic tank for longer hours.
Tuesday, March 24, 2009
What Happens After Puppy Takes Worm Medicine
What are the main parameters MKTOOL?
A brief explanation for those who want to keep trying different parameters in the MKTool, this is what makes each of them:
A brief explanation for those who want to keep trying different parameters in the MKTool, this is what makes each of them:
Nick / Roll P-Anteil
With a low value, more control "spongy "(values \u200b\u200b2-3)
With a high value, more agile MK (value 4)
Nick / Role D-Anteil
With a low, slow reactions but soft (values \u200b\u200baround 4)
With a high value, strong reactions to rapid movements of the sticks (values \u200b\u200baround 8)
Valued low, slow turns on itself (value approx. 6)
With a high value, quick turns (value approx. 12)
With too low, we have control on the MK (low normal with control, 80)
With a high value, rapid stabilization reactions (value approx. 100) Gyro I-Anteil
With a low, weak stabilization responses MK very sensitive to wind (120) 
With a high value, high stability, more wind resistant (value approx. 140-150)
With a high value, high stability, more wind resistant (value approx. 140-150) Best Mount And Blade Defeating
for hands with the welder ...
Here I put the list all components of a FC 1.3, in case one is encouraged to assemble parts of the plate that we can bring clean, BUT you have to solder SMD (my escapes me that for my pulse hehe): http://
www.reichelt.de/?ACTION=20; AWKID = 134869; PROVID = 2084
Other than that, because I think you need also plate and 3
Murata gyroscopes
Hale, if there are any brave do tell us if you need that prompted the board or the gyros, tell me please greetings!
Here I put the list all components of a FC 1.3, in case one is encouraged to assemble parts of the plate that we can bring clean, BUT you have to solder SMD (my escapes me that for my pulse hehe): http://
www.reichelt.de/?ACTION=20; AWKID = 134869; PROVID = 2084
Other than that, because I think you need also plate and 3
Murata gyroscopes
Hale, if there are any brave do tell us if you need that prompted the board or the gyros, tell me please greetings!
Subscribe to:
Posts (Atom)